13
ENGLISH
CHAPTER 10 OPERATION
Main menu
In the pre-setting page there is the list of the available functions as well as the following data: date,
time and cell internal temperature.
ESC
The 5 “interactive” keys allow you to select:
MANUAL CYCLES: i.e. the selection, the setting-up and the implementation of a manual
cooling or heating cycle.
STORED PROGRAMMES: i.e. the selection and/or the adjustement of automatic retarded
proofing processes stored in memory.
FAVOURITE PROGRAMS: i.e. the prompt recalling of the last 10 performed cycles
AUTOMATICI CYCLES: i.e. the selection, the setting-up and the implementation of a complete
automatic retarded proofing process.
CELL PRE-COOLING PROGRAMME: i.e. The implementation of the cell pre-cooling cycle.
The 5 “Navigate” keys allow you to scroll to the desired menu and to activate the different working
cycles:
ON/OFF
MENU
HOME
ESC
START/STOP
To Next Page
Loading...
