10
ENGLISH
Active keys are the backlit keys only.
9.2 INSTRUCTIONS FOR USE
9.2.1 Starting process
Before starting the Retarder-Proofer Cabinet you need to check if the electrical connections have
been made according to what stated in Chapter 14.
LOADING...
► Connect the machine to the power supply: the display will switch on completely for 10’’, then
it shall be on the “STAND-BY” status.
Starting / switching-off : Start the panel by pressing the ON/OFF touch button (1)
1
ESC
► If the power cut has caused clock error , the display will directly show the clock setting
screen.
PLEASE NOTE:
the control panel shall not verify whether the inserted date is correct, it is up
to the user to set it properly. (Par. 9.2.2)
► While the machine is ON, the display will show the date, the present time, the cell temperature
and all the functions which may be selected.
- Press the ON / OFF key (1) to switch off.
To Next Page
Loading...
