For Your Safety 1
107678 | V1.5-10/2019 15/ 106
1.7 Special safety instructions and signs
Appropriate safety instructions are mentioned in the specific chapters. They should be observed in the
same way as the general safety instructions contained in this chapter.
1.7.1 Signs
The following signs can be found on the e’line. Associated warnings are explained in the table.
Sign Description Explanation
Caution, consult accom-
panying documents
-
High voltage - Danger
ELECTROCUTION
During maintenance work, always power off
the machine using the main switch (see “5.9”
on page 46).
Burning - Danger
H
OT SURFACE
Contact may cause burns. Do not touch.
Corrosive product
CORROSIVE
Causes severe burns.
Avoid contact with skin and eyes.
Main switch Power ON.
Main switch Power OFF.
Main water inlet Water tap open.
Main water inlet Water tap closed.
Protective earthing
-
To Next Page
Loading...
