5 Operation
48/ 106 e’line User Manual | © Eversys AG
5.11 Emergency stop
To shut down all functions, either:
• switch OFF the main power switch (1).
• unplug the power cord from the mains socket.
Perform an emergency stop ONLY if the machine is completely stalled and does not respond to
any command.
The e’line must be located in such a manner that the main switch and power cord are accessible at all
times.
The mains power socket must be located near the e’line and must be easily accessible by the
operator.
Fig. 5-13 Emergency stop
To Next Page
Loading...
