7700 MultiFrame Manual
7700FC VistaLINK® Frame Controller
Revision 1.4.7 7700FC-7
• Do not short circuit batteries.
• Do not expose batteries to high temperatures, moisture or direct sunlight.
• Do not place batteries on a conductive surface (anti-static work mat, packaging bag or form trays)
as it can cause the battery to short.
3. SPECIFICATIONS
3.1. ETHERNET
Network Type: Fast Ethernet 100 Base-TX IEEE 802.3u standard for 100 Mbps baseband
CSMA/CD local area network
Ethernet 10 Base-T IEEE 802.3 standard for 10 Mbps baseband CSMA/CD local
area network
Connector: RJ-45
3.2. SERIAL I/O
Standard: RS-232
Connector: Female DB-9
Baud Rate: 57600
Format: 8 bits, no parity, 2 stop bits, no flow control
3.1. ELECTRICAL
Voltage: + 12VDC
Power: 7 Watts
EMI/RFI: Complies with FCC Part 15
Class A and EU EMC directive
3.2. PHYSICAL
7700FR-C frame mounting:
Number of slots: 1 (must be in slot 1 of 7700FR-C)
To Next Page
Loading...