7700 MultiFrame Manual
7700FC VistaLINK® Frame Controller
7700FC-24 Revision 1.4.7
This command sends the upgrade image to all cards in upgrade mode within the frame. (Note:
<<firmwarelocation>> in steps 8 and 9 should be replaced with the specific directory where the
upgrade file is saved and file name such as “c:\avm-2-05-030”.)
9. To upgrade a particular module within the frame, at the “ftp>” prompt
- Type: cd<space>Slotxx<Enter> (where “xx” is the specific slot number in the frame)
- Type: put<space><<firmwarelocation>>.bin<space>app<Enter>
This command sends the upgrade image only to the card in the specified slot number. Once the
upgrade is completed, to return to list view, type “cd<space>..<Enter>” at the ftp> prompt,
then follow from step 5.
To Next Page
Loading...