Evinrude E-TEC G2 User Manual

12
Using Your Evinrude E-TEC Outboard
Hang Tag
All outboards are shipped with the following
hang tag attached.
Remote Control Labels
All remote controls have the following labels
attached.
Operator's
Guide
355926
WARNING
Attach engine shut-off cord
(Lanyard) to operator.
Locate, read and
understand operator's
guide and all warnings.
Failure to do so could
result in serious injury.
Operator's
Guide
WARNING
008488
Shift position
Reverse / Neutral / Forward

Evinrude E-TEC G2 Specifications

General

Bore x Stroke	Varies by model
Full Throttle RPM Range	5400-6000 RPM
Alternator Output	133 Amps Total / 50 Net Dedicated
Lubrication	Multi-point targeted oiling
Cylinder Configuration	V6
Gear Ratio	1.85:1
Starting	Electric
Engine Type	2-stroke
Shaft Length	20", 25", 30"
Fuel Induction	Direct Fuel Injection (DFI)
Emissions	EPA 2013
Horsepower Range	150 - 300 HP
Fuel Type	87 Octane
Weight	505 - 635 lbs (varies by model)