Evinrude E-TEC G2 User Manual

50
Using Your Evinrude E-TEC Outboard
AIS Inspection Checklist
Use the following checklist as a guide when inspecting for AIS.
Inspection Items 
Boat
1
Inspect hull.
2
Inspect floor.
3
Inspect live well.
4
Inspect transom well.
Inspect water inlet & outlet fittings.
Inspect anchors and lines.
Inspect boarding ladder.
Inspect transducers or other attachments to the hull.
Accessories
Inspect fishing tackle and fishing lines.
Inspect bait buckets.
Inspect landing nets.
Inspect water sports equipment (skis, wakeboards etc.).
Inspect tow ropes.
Outboard(s)
5
Inspect water intake screens.
6
Inspect gearcase.
7
Inspect propeller.
Trailer
8
Inspect bunks and/or rollers.
9
Inspect fenders & frame.
10
Inspect tires & wheels (including spare tire)
Inspect license plate & brackets.
Inspect lights and wiring.
1
2
3
4
5
6
7
8
9
10
8
9

Evinrude E-TEC G2 Specifications

General

Bore x Stroke	Varies by model
Full Throttle RPM Range	5400-6000 RPM
Alternator Output	133 Amps Total / 50 Net Dedicated
Lubrication	Multi-point targeted oiling
Cylinder Configuration	V6
Gear Ratio	1.85:1
Starting	Electric
Engine Type	2-stroke
Shaft Length	20", 25", 30"
Fuel Induction	Direct Fuel Injection (DFI)
Emissions	EPA 2013
Horsepower Range	150 - 300 HP
Fuel Type	87 Octane
Weight	505 - 635 lbs (varies by model)