KC PRIME
14
Connecting the printer
The printer must be connected to a properly protected and grounded electrical system.
FI: Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan.
NO: Apparatet må tilkoples jordet stikkontakt.
SE: Apparaten skall anslutas till jordat uttag.
DK: Printeren skal tilsluttes til en korrekt beskyttet og jordforbundet el-installtion.
To do so:
• Connect the power cable to the power supply unit, then plug the power cable jack into the
printer
.
• Next, connect the power cable plug to a grounded power socket outside of the terminal.
• The printer is powered on: the control panel lights up indicating that the printer is working
properly.
If the control panel does not light up, then either the installation has not been carried out correctly
or the printer is not working properly. Check the installation.
To Next Page
Loading...
Need help?
General
