Evolis KC PRIME User Manual

You may select the Feeder side or the rear (R) side to insert the card, according to the way the printer is installed in the self-service terminal
To change the insertion setting, launch the EPS on Windows or CUPS driver on Macintosh and open the Feeder/Hopper tab.
KC PRIME
17
For optimum quality, the cards used must be ISO 7810 certified.
Use only the card types recommended by Evolis.
Avoid touching the printable surface of the cards in order to preserve print quality.
Do not use cards that have been damaged, folded, embossed, or dropped on the floor.
Cards may be stuck together due to static electricity – avoid touching the card surface when separating them.
Cards
Remove the weight
fromthefeeder.
Insert the cards, 200 or 100 cards maximum
(depending on the feeder capacity) with
0.76 mm thickness.
Hold and insert the cards as shown
inthediagram.
Put the weight back on
theinserted cards.
Storing new cards
Keep your cards protected from dust in their original packaging.
Loading the cards
NOTE

Evolis KC PRIME Specifications

General

Brand	Evolis
Model	KC PRIME
Category	Printer
Language	English