EvoLogics Sonobot - Processing Measurement Data

• Press the Depth recording button to start storing depth measurement data.
• Press the Play button to start real-time visualisation of the side-scan-sonar data.
• Press the Record button to start saving side-scan-sonar data.
• Monitor the visualisation of the measurement data on the map view.
• Un-press Depth recording and/or Recording buttons to stop recording corresponding data.
You can repeat the steps above to record several sets of measurement data into a project-file:
• Press the Save button to save the recorded measurement data into a project.
Please refer to the supplied manufacturer’s guide for detailed software description and operating instructions!
4.4.3 Processing measurement data
• Tools:
– Use the Pan tool to pan the map view.
– Measure distances on the map with the Measure distance tool.
– Export the data to Google Earch with the Google Earth tool (internet connection is required).
– Click on the data to display the vehicle’s route.
• 3D visualisation of the survey area:
– In the Map View, select the area to be visualised with the Select area tool.
– Right-click on the selected area and choose 3D from the pop-out menu.
– A 3D image will appear, rotate and scale it to your preference.
– Right-click on the image and choose Report to save the current view to an image file.
• Save selected area to an image file with the Report tool:
– In the Map View, select the area to be visualised with the Select area tool.
– Right-click on the selected area and choose Report from the pop-out menu.
– Adjust report settings:
select image Size, Transparent background or a Background color, opt to Draw Frame with coordinates,
the background Grid and the Grid Color.
• Save measurement data into another folder
54