Evolution Dog Wash Owners/Operators Manual Page 39
6.0 Operating The Unit
O
nce you have completed the Uncrating, Inspecting, Leveling and Securing, Utilities Connections, and
Setup you are ready to put your EVOLUTION into service and begin collecting revenue. The following
section will identify and explain the basics of operations.
6.1 Operations
Operating the EVOLUTION Dog Wash is very simple with just a bit of understanding. It is very
important that the owner/operator have a clear understanding on how to operate the unit and
be able to instruct the customers in its proper use.
6.1.1 Manual/Bypass – Cabinet Open
For Manual/Bypass operation locate and turn on
the operator switch is located to the left of the
digital timer when looking at the back of the door.
The unit now has complete power and operation
capabilities. Any function may be used while the
operator switch is in the “on” position. The
manual operations will be done while performing
maintenance, priming product pumps, or
customer operations in the event other possible
operational problems. Once one of these
operations have been completed, turn off the
operator switch.
Wa
rning – you should never leave the Manual/Bypass switch in the “on” position for extended
operation or customer operations. Operating in this mode can lead to potential issues if the
machine is left unattended.
6.1.2 Customer Operations
The Evolution Dog Wash is designed to offer to the end user/customer the best Dog Wash
available in the industry. It is designed for simple, safe, and convenient operation by your
customers. The following is the typical flow of how a customer would use the Dog Wash to
wash their dog:
1. Customer brings their dog/animal to be washed in the EVOLUTION.
To Next Page
Loading...