102
Open window/door sensor
1.
P
art A, the transmitter (sensor) and Part B, the magnetic part,
should be installed on the fixed frame of the door or window and
the magnetic part should be installed on the moving part of the
door or window.
2.
A
fter installation, the distance between the magnet and th
e
tr
ansmitter should be no more than 2 cm.
Siren
1.
W
e recommend installing the siren in the physical center of th
e
h
ouse or building to ensure the best possible reception from all
wireless detectors.
RFID TAGS
Pairing the new RFID tag
Select "Main menu → Parts → RFID → Add".
"Synchronisation" is displayed, the system enters pairing mode
and counts down the time.
Place the tag near the RFID panel area.
After adding the serial number of the label to the panel, th
e
m
essage "Learning OK" will appear. The system will display
"Device Code Learned" if the serial number of the tag has been
found.
Remove
Select "Main menu → Parts → RFID → Delete".
Use th
e b
uttons to navigate to the serial number you want
to delete.
To Next Page
Loading...