103
Press to delete the selected serial number.
Delete all
Select "Main menu → Parts→ RFID→ Delete all".
The total number of learned serial numbers will be displayed.。
T
o delete all serial numbers, press .
Pairing with a wireless siren
Wireless strobe siren control to enter pairing mode (see siren
user manual)
Select "Main menu → Parts → Siren". The panel displays
"Device code learned" and sends a transmission signal to the
siren.
Siren gives a successful indication.
SYNCHRONIZATION AND PAIRING WITH WIRELESS SWITCH
Select "Main menu → Parts → Alarm socket", the system will
display the alarm socket pairing screen.
Control the wireless switch to enter pairing mode (see th
e
wi
reless switch user guide)
Press the "on" button and the "off" button in turn , th
e
p
anel will display " Device code has been learned" and send a
transmission signal to the wireless switch twice.
The wireless switch indicates a successful pairing.To test if the
pairing is OK, press the "on" and "off" button and check if th
e
wi
reless connection can be opened and closed.
To Next Page
Loading...