page 28 of 49
Network Configuration has important settings that are to be configured when deploying
the charger, such as the internet network interface and possible fallback (secondary)
interfaces:
Enable – the charger is available for plug-in
charging when offline without
authorization by card or app
Disable – the charger is not available to
charge when offline without authorization
“GSM interface“ is used to
configure mobile data settings
and shows diagnostic signal
information
Set access credentials of
Internet network
(home or office router
login) that the charger uses
“Network interface“
sets the primary and
secondary (fallback in
case the primary
connection method
fails) choices for
connecting to the
internet
To Next Page
Loading...