page 46 of 49
set to "0" is +-10% of the
nominal supply (207-
253VAC). Values of 1-23
are allowed, which expand
both lower and upper
threshold by the respective
amount in VAC.
The number of OCPP
configuration keys that can
be acquired from a single
get configuration command.
The interval between each
heartbeat PDU.
The light intensity of the
LED ring of the charger in %
of maximum.
MaxChargingProfilesInstalled
The time interval between
each meter value during a
session.
Voltage.L1-
N,Voltage.N,Te
mperature,Cur
rent.Offered.L
1,Current.Impo
rt.L1,Power.Ac
tive.Import.L1,
Energy.Active.I
mport.Register
.L1
A list of measurands sent for
each meter value during a
session.
StopTransactionOnEVSideDisconnect
StopTransactionOnInvalidId
UnlockConnectorOnEVSideDisconnect
When set to TRUE the
Charge Point SHELL unlock
the connector on Charge
Point side when the cable is
unplugged at the EV
Defines the timeout value
for the main communication
network interface
Defines the timeout value
for the fallback
communication network
interface
Defines the duration for
which the fallback network
interface is active before
reverting to the main
network interface