How to fix network startup issues on EVS XT-3 Server?
If the network does not start up properly, even with correct configurations and Multicam started, verify that the cables connecting all EVS servers are suitable and not excessively long for operation.
What to do if connection cannot be established on EVS XT-3?
If the connection cannot be established, ensure that all equipment is set to the same speed and connected to the non-relay connectors.
General| Power Supply | Dual redundant power supplies |
|---|---|
| Processor | Intel Xeon |
| RAID Support | RAID 0, 1, 5, 6, 10 |
| Recording Format | ProRes, DNxHD |
| Control Interface | Ethernet |
| Network Connectivity | 10Gb Ethernet |
| Video Format | HD |
| Networking | Ethernet |
| Memory | 32GB |
| Storage | SSD |
| Operating System | Linux |
| Form Factor | Rackmount |
To Next Page
![Preview: EVS XT[2]](https://data.easymanua.ls/products/617905/200x200/evs-xt-2.webp)
