EVS XT-3

2. Safety and Compliance
2.1. Safety
This equipment has been designed and tested to meet the requirements of the following:
• EN 60950 (European): Safety of information technology equipment including business
equipment.
• IEC 950 (International): Safety of information technology equipment including
business equipment.
In addition, this equipment has been designed to meet the following:
• UL 1950 - USA (USA): Safety of information technology equipment including business
equipment.
2.2. EMC Standards
This equipment complies with following EMC standards:
Standard Area Title
EN 55022 European Emission Standard
EN 61000-3-2 European Electromagnetic Compatibility (EMC) Part 3 (Limits);
Section2; limits for harmonic current emissions
(equipment input current <16A per phase)
EN 61000-3-3 European European Electromagnetic Compatibility (EMC) Part 3
(Limits), Section 3; limitation of voltage fluctuation and
flicker in low-voltage supply systems for equipment with
rated current of 16 A.
EN 61000-4-3 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 3; Testing and measurement
techniques - Radiated, radio-Frequency,
electromagnetic field immunity test.
EN 61000-4-4 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 4; Testing and measurement
techniques - Electrical fast transient/burst immunity
test.
EN 61000-4-5 European European Electromagnetic Compatibility (EMC) Part 4
(Limits), Section 5; Testing and measurement
techniques - Surge immunity test.
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 11.02
2. Safety and Compliance 3