Excell PWH3 User Manual

EXCELL PRECISION CO., LTD
02005159 ZSME300000225
39
 Command Mode
Command Format A
Host
Command
Slave
Command
MZ
Zero
SO
Command mode
MT
Tare
UA
Switch to the first unit
MG
Gross weight
UB
Switch to the second unit
MN
Net weight
UC
Switch to the third unit
CT
Clear TARE value
UD
Switch to the forth unit
SC
Continuous transmission
UE
Switch to the fifth unit
SA
Auto transmission
UF
Switch to the sixth unit
%
Stop continuous transmission and enter the command mode
Note: UA ~ UF settings are depended on the model of the scale
Command Format B
Host
Command
Slave
Data
RW
Read current weight
RH
Read Gross (simple)
RG
Read Gross weight
RI
Read Net (simple)
RN
Read Net weight
RJ
Read comparison situation +
current display of weight
(simple)
RT
Read TARE
RK
Read comparison situation +
Gross (simple)
RB
Read current display of
weight (simple)
RL
Read comparison situation +
Net (simple)
Note: a. add % before the command to read continuously
b. add # before the command to transmit a stable value
RJ,RK,RL Command Description
If RL command entered, and
if weight is higher than HI (FNC 03 setting), and if the current weight is 10 kg, the following
will be displayed: “100+ 10.000”
If weight is higher than HI (FNC 03 setting), and if the current weight is 0.5 kg, the
following will be displayed: “001+ 0.500”
If weight is between HI and LOW, and if the current weight is 1 kg, the following will be
displayed: 010+ 1.000

Excell PWH3 Specifications

General

Brand	Excell
Model	PWH3
Category	Touch Panel
Language	English