Excell QW - RS232 6;7 Digits Setting

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
33
2-2-8 Output Condition Settings
Select in the RS232 serial interface setting mode to Reset of
Auto Transmission.
Output condition settings
The LCD shows the last setting.
 Default setting:
Output condition settings
Use ZERO or UNIT keys to select the
desired setting:
= All output
= Stable output
(No output when OL or unstable)
= Stable output
(OL included)
Press TARE | PT key
Use ZERO or UNIT keys to
select the desired setting
Press TARE | PT key
Key in the parameter “00”
Press TARE | PT key to exit
RS232 2-way serial
interface settings
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward