Excell QW - Chapter 3 Wireless Connection Instruction (Option); Step 1: Connect to your device

EXCELL PRECISION CO., LTD
02005159 ZSME300000350
36
2-2-12 RS485 ID Input (Option)
Select in the RS232 serial interface setting mode to reset of
Auto Transmission.
2-2-13 Line Feed Input
Line feed would be available only when was set as or .
Press TARE | PT key
Press TARE | PT key
Display shows the previous setup
Use upward and downward key to
select, and use TARE | PT key to confirm
Factory default: 2
Display shows the previous setup
Use upward and downward key to
select, and use TARE | PT key to
confirm
Press TARE | PT key
Press TARE | PT key
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward
1 ZERO key  Upward key (0~9 digit entry)
1 UNIT key  Downward key (0~9 digit entry)
1 TARE | PT key  Move cursor rightward
1 NET | GROSS key  Move cursor leftward