209173 RCD-2
Index A
135
13.2 USING A VALVE
The valve is closed when the valve handle is at right angles to the pipe. The valve is open when the valve handle is in line
with the pipe.
Using the drainage valve
- The direct-to-sea drainage valve can be sealed by means of the drilled hole on the handle.
- To lock the drainage valve in the closed position: Pass the tightening collar around the drainage valve and feed through
the hole in the handle as shown.
1. Open valve
2. Closed valve
Plastic valve Bronze valve
Valves, thru-hull inlets and other brass or
bronze fittings have a lifespan of around 5 years.
All valves, thru-hull inlets and other brass or
bronze accessories must be checked by a
professional every year and replaced as
necessary.
- Beware of any unintentional draining.
Water systems
13
To Next Page
Loading...