44
209173 RCD-2
Index A
5.7 WINCHES
Manual winches
- Do not leave loose ropes on the winches - secure them to cleats.
Electric winches
- The electric winches are powered by direct current.
- A breaker protects the electrical circuit.
- An operation relay is fitted to the electrical circuit.
- A load controller is fitted to the electrical circuit: This system protects the winches against overload by temporarily
interrupting the electrical supply. The load controller is programmed in the factory.
- Inserting a winch handle into an unloaded winch automatically disconnects the motor transmission and allows it to be
used manually.
NOTE: Operating the electrical winches requires heavy battery usage: Make sure the battery bank is
systematically recharged after a day's sailing.
Rinse winches regularly with fresh water
- Rinse winches regularly with fresh water.
- Dismantle, clean and lubricate each winch annually. Parts that have been damaged or worn may need replacing.
Location: Cockpit Access: Port and starboard aft cabins
1. Electric winch
2. Control
1. Motor
2. Operation relay
- The use of an electric winch for furling/
unfurling the genoa or any other foreward sail
must be strictly avoided (risk of the forestay
breaking which may lead to dismasting).
- Refer to the manufacturer's instructions for
use and maintenance.
- Avoid bulky clothing, long hair and jewellery
that might become caught in the winch when it is
moving. Avoid riding turns when using the
winches.
Rigging and sails
To Next Page
Loading...