188
209173 RCD-2
Index A
17.2 INTERIOR WOODWORK
Varnished wooden panels:
- The acrylic varnish has medium resistance to external chemical damage as well as minor scratches.
- Clean regularly with lukewarm soapy water.
- Do not use polish (this may result in unwanted brightening of appearance).
- For scratches, remove the panel and have it re-varnished by your dealer.
Floors:
- The floors fitted onboard are laminated.
- Clean regularly with lukewarm soapy water.
- In the event of a scratch, remove the plank and replace it with a new one (consult your dealer).
17.3 INTERIOR MAINTENANCE
- Take advantage of fine weather to air the interior upholstery.
- Remove the cushions during lengthy periods of absence.
- Make sure the bilges are clean and dry.
- For lengthy periods of absence, leave the icebox and fridge doors open to prevent mould from developing.
- Use a dehumidifier in the saloon and ensure cabin and storage doors are left open (cupboards, iceboxes...).
- If in doubt or if stains persist, consult a
cleaning specialist.
- :For winterisation, ensure the curtains are
drawn to prevent prolonged exposure of the
varnish and fabric to sunlight. This will prevent
the risk of discolouration.
- NEVER:
- use solvents or abrasive products.
- use a heat source (hairdryer/clothes
dryer);
- use detergent, silicone, acetone,
chlorine-based products or hot water;
- use a high-pressure cleaner.
Hull fittings
To Next Page
Loading...