Exerpeutic TF2000 - Step 7: Powering On the Treadmill; Step 8: Safety Tether Key Attachment

18
ASSEMBLY
Step 7
A. Turning on the treadmill:
1. Plug the Power Cord (D10) into a wall outlet and then turn put the Power Switch (D09)
into the ON position.
Warning: Do not use a power adaptor with the power cord.
Warning: Do not use an extension cord with the power cord.
Warning: The wall outlet must be grounded for the treadmill to function correctly.
Warning: ALWAYS turn the power switch to the OFF position before unplugging or plugging
in the power cord into an outlet.
Step 8
A. Attaching the Safety Tether Key
1. Attach the Safety Tether Key (D07) onto the Console Panel (C13) and start the treadmill.
Warning: Read the LUBRICATION section for instructions to lubricate the walking deck and
the belt before using the treadmill.
Warning: Always clip the Safety Tether Key to your clothes before starting a workout.