Exerpeutic TF3000 - Assembly Instructions; Step 1: Installing Front Posts

12
ASSEMBLY
Step 1
1a. Lifting and Installing the Front Post: Lift up the Right and Left Front Post (6) & (5) from the
folded position as shown in Fig. A. Align the bolt holes on the Right and Left Front Post (6)/(5)
and the Bed Frame (2). Insert two Hex Bolts (52) and two Flat Washers (53) and tighten with
6mm Allen Wrench provided. Insert the four Hex Bolts (12), four Curved Washers (69) and four
Spring Washers (70). Tighten the hardware with the 5 mm Allen Wrenches provided.
2
Tool:
6mm / 5mm Allen Wrench
1 PC
(52) Hex Bolt
2PCS
(53) Flat Washer
2PCS
Hardware:
(12) Hex Bolt
4PCS
(69) Curved Washer
4PCS
(70) Spring Washer
4PCS
6
5
Fig. A