Exerpeutic TF3000 - Step 2: Installing the Handlebar

13
ASSEMBLY
Step 2
2a. Installing the Handlebar: Rotate the Handlebar (54) to align the bolt holes at the rear with the
Right and Left Front Post (6) & (5) bolt holes. Insert two Hex Bolts (12), two Curved Washers
(69) and two Spring Washers (70). Tighten the hardware with the 5mm Allen Wrench provided.
Tool:
5mm Allen Wrench
1 PC
Hardware:
(12) Hex Bolt
2PCS
(69) Curved Washer
2PCS
(70) Spring Washer
2PCS
54