Exerpeutic TF3000 - Steps 3 & 4: Powering On and Safety Tether

14
ASSEMBLY
Step 3
3a. Turning on the treadmill: Plug the Power Cord (22) into a wall out let and then put the Power
Switch (24) into the ON position.
Warning: Do not use a power adaptor with the power cord.
Warning: Do not use an extension cord with the power cord.
Warning: The wall outlet must be grounded for the treadmill to function correctly.
Warning: ALWAYS turn the power switch to the OFF position before unplugging or plugging
in the power cord into an outlet.
Step 4
4a. Attaching the Safety Tether Key: Place the Safety Tether Key (49) onto the console as shown
in the image above.
Warning: Always clip the Safety Tether Key to your clothes before starting a workout.