Maintenance
80 FOT-930
Upgrading the Embedded Software
Note: The FlexCare warranty program includes Calibration/Verification packages
(see Service and Repairs on page 91).
Upgrading the Embedded Software
To upgrade the unit’s embedded software, you will need to obtain the
upgrade files from EXFO’s Technical Support Group. You will also need an
RS-232 cable and the Firmware Update application.
Recycling and Disposal
(Applies to European Union Only)
For complete recycling/disposal information as per European Directive
WEEE 2012/19/UE, visit the EXFO Web site at www.exfo.com/recycle.
IMPORTANT
During software upgrades, you should connect your unit to a
power outlet. If problems occur, contact EXFO.
To Next Page
Loading...
