Test Results
582 FTB-700/800/900 Series
Traffic - Path OAM
Traffic - Path OAM
From the Test menu, tap Results, Traffic, and the Path OAM tab.
Reports the counts of the following messages transmitted and received.
Total count is reported for TX and RX.
2DMM (Two-way Delay Measurement Message) reports 2DMM
messages transmitted.
2DMR (Two-way Delay Measurement Response) reports 2DMR
messages received having a valid CRC4 and the multi-block containing
the ascending sequence numbers 0 to 5.
BAS (Basic OAM Message) reports Basic OAM messages having a valid
CRC4.
CSM (Client Signal Message) reports the CSM messages having a valid
CRC4.
CVM (Connectivity Verification Multi-block) reports CVM messages
having a valid CRC4 and the multi-block containing the ascending
sequence numbers 0 to 7.
Responder
Note: Available when the OAM Responder check box is selected (refer to Path
OAM on page 318).
Reports the counts of the following messages transmitted and received.
2DMM (Two-way Delay Measurement Message) reports the count of
2DMM messages received having a valid CRC4 and the multi-block
containing the ascending sequence numbers 0 to 1.
2DMR (Two-way Delay Measurement Response) reports the count
of 2DMR messages transmitted.
To Next Page