Distributor in USA & Canada
ENERVEX Inc.
1685 Bluegrass Lake Parkway
Alpharetta
GA 30004
P: 770.587.3238
F: 770.587.4731
T: 800.255.2923
info@enervex.com
www.enervex.com
www.exodraft.com
Resetting to Factory Defaults
PROG
Q1 SET EXHAUST
* 0.01 inWC
Q10 SERVICE MENU
PROG
2 EXHAUST
61 VERSION 66 FACTORY
* NO
66 FACTORY
* NO
66 FACTORY
* YES
Press PROG key for 3 seconds
to access menu
Scroll to [ Q10 SERVICE MENU ]
and press PROG
Scroll to 6 SERVICE and press PROG
Scroll to 66 FACTORY and press PROG
Change NO to YES and press PROG
Remove supply power to control. Wait 30 seconds and reapply power.
Control is now reset to factory default.
NOTES
6 SERVICE
PROG
PROG
PROG
User Settings
Please record and keep the following information. It will ease servicing the control after installation.
Q1 EXHAUST setting ______________________________________ “WC
Q2 EXHAUST Operating Mode Continuous/Intermittent (circle one)
Q3 EXHAUST Pre-purge ___________________________________ seconds
Q4 EXHAUST Post-purge ___________________________________ seconds
Q5 INTAKE setting ______________________________________ “WC
Q6 INTAKE Operating Mode Continuous/Intermittent (circle one)
Q7 INTAKE Pre-purge ___________________________________ seconds
Q8 INTAKE Post-purge ___________________________________ seconds
Q9 ROTATION CHECK Yes No (circle one)
To Previous Page
Loading...