Exodraft EBC30 - 5.7 Programming Sequence

5.7 Programming sequence
PROG
PROG
Q1 SET EXHAUST
* 0.01 inWC
Q1 SET EXHAUST
* 0.01 inWC
PROG
Q2 EXH OPER MODE
* CONTINUOUS
PROG
PROG
Q3 SET EXH PRE-PURGE
* 60 s
Q3 SET EXH PRE-PURGE
* 60 s
PROG
PROG
Q4 SET EXH POST-PURGE
* 60 s
Q4 SET EXH POST-PURGE
* 60 s
PROG
PROG
Q5 SET INTAKE
* 0.01 inWC
Q5 SET INTAKE
* 0.01 inWC
PROG
PROG
Q6 INT OPER MODE
* CONTINUOUS
Q6 INT OPER MODE
* CONTINUOUS
PROG
PROG
Q7 INT PRE-PURGE
* 60 s
Q7 INT PRE-PURGE
* 60 s
PROG
PROG
Q8 INT POST-PURGE
* 60 s
PROG
Press key for 3 seconds
to access menu
The pressure can be set
between 0.012 and 0.596
(Default is 0.012)
The pressure can be set
between 0.012 and 0.596
(Default is 0.012)
Available selections are:
"continuous" and "intermittent".
Values can be set from 0 to
360 seconds.
Available selections are:
"continuous" and "intermittent".
Values can be set from 0 to
360 seconds.
Values can be set from 0 to
360 seconds.
Values can be set from 0 to
360 seconds.
Q8 INT POST-PURGE
* 60 s
NOTES
PROG
RESET
Q9 ROTATION CHECK
* OFF
PROG
Q9 ROTATION CHECK
* OFF
Values can be ON or OFF.
Saves all settings and
displays default display.
PROG
Q2 EXH OPER MODE
* CONTINUOUS
17
EBC30 3002180 100315