30
Elen
Setting the clock: hours, minutes and day
PROGRAMMING USING THE DISPLAY
Accessing the second menu level
With the machine on, press the Continuous Dispensing button on
the Left-hand drink buttons and hold it down (for over 8 seconds) until
the dose-programming menu is displayed. All the drink buttons lights
will be turned on and the Continuous Dispensing button light will flash. The
display will be as shown in fig. 06.
Hold down the Continuous Dispensing button until the menu
displays the “set clock” option (see fig. 07).
This provides access to the second menu level.
g. 06
Doses setting
Select within 30s
g. 07
Set clock
To set the clock, press the 2 Short Espressos button whilst the “Set
clock” message is displayed.
The hours values will start flashing. Increase/decrease the values by
pressing the 1 Short Espresso and 1 Long Espresso buttons
(see fig. 08).
With the desired value is reached, accept it the pressing the 2 Short
Espressos button .
The minutes digits will now start flashing. Increase/decrease the values by
pressing the 1 Short Espresso and 1 Long Espresso buttons.
With the desired value is reached, accept it the pressing the 2 Short
Espressos button .
Set the day of the week in the same way ( , and ).
After setting the values, pressing the 2 Short Espressos button
accesses the auto On/Off menu.
g. 08
Clock adjust
hh:mm Day
To Next Page
Loading...
Need help?
General
