Resetting and Disabling OSPF Settings
Summit 200 Series Switch Installation and User Guide 227
Resetting and Disabling OSPF Settings
To return OSPF settings to their defaults, use the commands listed in Table 68.
Table 68: OSPF Reset and Disable Commands
Command Description
delete ospf area [<areaid> | all] Deletes an OSPF area. Once an OSPF area is
removed, the associated OSPF area and OSPF
interface information is removed. The backbone
area cannot be deleted. A non-empty area
cannot be deleted.
disable ospf Disables OSPF process in the router.
disable ospf export direct Disables exporting of local interface (direct)
routes into the OSPF domain.
disable ospf export rip Disables exporting of RIP routes in the OSPF
domain.
disable ospf export static Disables exporting of statically configured routes
into the OSPF domain.
unconfig ospf {vlan <name> | area
<areaid>}
Resets one or all OSPF interfaces to the default settings.
To Next Page
Loading...
