314 Summit 200 Series Switch Installation and User Guide
Software Upgrade and Boot Options
save {configuration} {primary | secondary} Saves the current configuration to nonvolatile
storage. You can specify the primary or
secondary configuration area. If not specified,
the configuration is saved to the primary
configuration area.
show configuration Displays the current configuration to the
terminal. You can then capture the output and
store it as a file.
upload configuration [<ipaddress> |
<hostname>] <filename> {every <time>}
Uploads the current run-time configuration to
the specified TFTP server. If every <time>
is specified, the switch automatically saves the
configuration to the server once per day, at the
specified time. If the time option is not
specified, the current configuration is
immediately uploaded.
upload configuration cancel Cancels a previously schedule configuration
upload.
use configuration [primary | secondary] Configures the switch to use a particular
configuration on the next reboot. Options
include the primary configuration area or the
secondary configuration area.
use image [primary | secondary] Configures the switch to use a particular image
on the next reboot.
Table 74: Boot Option Commands (continued)
Command Description
To Next Page
Loading...
Need help?
General
