Introduction
AP-7562 Installation Guide
5
Antennas are included with the SKUs listing an antenna facade, but must be
ordered separately for the other SKUs and are not included:
Dual Band 2.4 GHz / 5 GHz Antenna - US and Canada
Single Band 2.4 GHz Antennas - US and Canada
Part Number Antenna Type 2.4 GHz Peak Gain
Part Number Antenna Type
5.2 GHz Peak Gain
Single Band 5 GHz Antenna - US and Canada
Outdoor Elevation Gain Configuration for US SKUs
Per FCC requirement, the use of the Access Point on UNII-1 band requires installers to input
antenna elevation gain for dipole antennas during configuration. This information can be
found in the Extreme Networks Antenna Specification Guide available at
http://
documentation.extremenetworks.com.
NOTE
Antennas are included in the SKUs with an antenna facade but must be
ordered separately for the other SKUs and are not included.
Part Number Antenna Type
2.4 GHz Peak
Gain
5.2 GHz Peak
Gain
ML-2452-HPAG4A6-01 Dipole 4.0 7.3
ML-2452-HPA6X6-036 Dipole 4.0 7.3
ML-2452-HPA6-01 Dipole 5.3 6.1
ML-2452-PNA5-01R Panel 5.5 6.0
ML-2452-PNL3M3-1 Polarized Panel 9.7 9.2
AP-7562-670042-US Dipole 4.8 6.4
AP-7562-670042-WR Dipole 4.8 6.4
ML-2499-FHPA5-01R Dipole 5.3
ML-2499-HPA4-01 Dipole 4.5
ML-2499-5PNL-72-N Panel 6.5
ML-5299-HPA5-01 Dipole 5.6
To Next Page
Loading...
