Extreme Networks Summit 300-48 - Page 124

124 Summit 300-48 Switch Software User Guide
Unified Access Security
config security-profile open-wpa-64 ess-name open-wpa-64-ess
Open - WPA (Dynamic) - WEP 128
1 Create a security profile (open-wpa-128) by copying from the default unsecure profile.
create security-profile open-wpa-128 copy unsecure
2 Create a VLAN (wpa-vlan) for the potential clients that will connect to the network using this
security-profile.
create vlan wpa-vlan
3 Configure the tag for the VLAN
config vlan wpa-vlan tag 10
4 Add the wireless port to the VLAN.
config vlan wpa-vlan add ports 1:5 tagged
5 Configure the Dot11 Authentication, Network Authentication and Multicast Cipher/Encryption and
also assign the “default-user-vlan” parameter.
config security-profile open-wpa-128 dot11-auth open network-auth wpa encryption
wep128
config security-profile open-wpa-128 default-user-vlan wpa-vlan
6 Configure the name of the ESS
config security-profile open-wpa-128 ess-name open-wpa-128-ess
Open - WPA (Dynamic) - TKIP
1 Create a security profile (open-wpa-tkip) by copying from the default unsecure profile.
create security-profile open-wpa-tkip copy unsecure
2 Create a VLAN (wpa-vlan) for the potential clients that will connect to the network using this
security-profile.
create vlan wpa-vlan
3 Configure the tag for the VLAN
config vlan wpa-vlan tag 10
4 Add the wireless port to the VLAN.
config vlan wpa-vlan add ports 1:5 tagged
5 Configure the Dot11 Authentication, Network Authentication and Multicast Cipher/Encryption and
also assign the “default-user-vlan” parameter.
config security-profile open-wpa-tkip dot11-auth open network-auth wpa encryption
tkip
config security-profile open-wpa-tkip default-user-vlan wpa-vlan
6 Configure the name of the ESS
config security-profile open-wpa-tkip ess-name open-wpa-tkip-ess
Open - WPA (Dynamic) - AES
1 Create a security profile (open-wpa-aes) by copying from the default unsecure profile.
create security-profile open-wpa-aes copy unsecure