Extreme Networks Summit 300-48 - Page 207

UDP-Forwarding
Summit 300-48 Switch Software User Guide 207
config vlan <name> udp-profile <profile_name> Assigns a UDP-forwarding profile to the
source VLAN. Once the UDP profile is
associated with the VLAN, the switch picks
up any broadcast UDP packets that
matches with the user configured UDP
port number, and forwards those packets
to the user-defined destination. If the UDP
port is the DHCP/BOOTP port number,
appropriate DHCP/BOOTP proxy functions
are invoked.
create udp-profile <profile_name> Creates a UDP-forwarding profile. You
must use a unique name for the
UDP-forwarding profile.
delete udp-profile <profile_name> Deletes a UDP-forwarding profile.
show udp-profile {<profile_name>} Displays the profile names, input rules of
UDP port, destination IP address, or VLAN
and the source VLANs to which the profile
is applied.
unconfig udp-profile vlan [<name> | all] Removes the UDP-forwarding profile
configuration for one or all VLANs.
Table 85: UDP-Forwarding Commands (continued)
Command Description