Extron electronics CrossPoint 450 Plus Series Setup Guide

6 CrossPoint / MAV Matrix Switchers • Installation
d
Connections for balanced and unbalanced audio inputs
(most audio models) — Connect balanced or unbalanced
stereo audio inputs to these 5-pole captive screw
connectors.
LR
Unbalanced Input
Balanced Input
(high impedance) (high impedance)
Ring
Sleeve (s)
Tip
Slee
ve
Tip
Slee
ve
Tip
Tip
Ring
Figure 5. Audio Input Connector Wiring
e
Connections for balanced and unbalanced audio outputs
(most audio models) — Connect balanced or unbalanced
stereo audio output devices to these 5-pole captive screw
connectors.
Unbalanced Output
Balanced Output
LR
Ring
Tip
Sleeve(s)
Tip
Ring
Sleeve(s)
Tip
Tip
NO GR
OUND HERE.
NO GR
OUND HERE.
Figure 6. Audio output connector wiring
ATTENTION:
• For unbalanced audio, connect the sleeves to the
gr
ound contact. DO NOT connect the sleeves to the
negative (-) contact.
•
Pour l’audio asymétrique, connectez les manchons
au contact au sol.
Ne PAS connecter les manchons
aux contacts négatifs (–).
f
Connections for unbalanced audio inputs
(MAV Plus 126 AV RCA) — Connect unbalanced
stereo
audio inputs to each pair (left and right) of female
RCA connectors.
g
Connections for unbalanced audio outputs
(MAV Plus 126 AV RCA) — Connect unbalanced
stereo
audio output devices to each pair (left and right) of
female RCA connectors.

Extron electronics CrossPoint 450 Plus Series Specifications

General

Brand	Extron electronics
Model	CrossPoint 450 Plus Series
Category	Matrix Switcher
Language	English