Extron electronics CrossPoint 450 Plus Series Setup Guide

12 CrossPoint / MAV Matrix Switchers • Operation
Selecting Lock mode 2 or toggling between
mode 2 and mode 1
NOTES:
•
If the switcher is in Lock mode 0 or mode 1, this
pr
ocedure selects mode 2.
• If the switcher is in Lock mode 2, this procedure selects
mode 1.
Toggle the lock on and off by pressing and holding the
Video
button and the
Audio button for approximately 2 seconds.
I / O
VIDEO AUDIO
I / O
VIDEO AUDIO
Press and hold
simultaneously.
The b
uttons blink twice
.
Release the buttons.
2 seconds
Viewing and Adju s ting the Audio Level
1. Press and hold the Audio button until it flashes.
AUDIO AUDIO
Audio button blinks.
Press and
Hold
2 seconds
2. Press an input or output button. Refer to the
CrossPoint 450 Plus / CrossPoint Ultra / MAV Plus Switcher
Manual, chapter 3, “Operation”, to read the displayed value.
3. Increase/decrease the level or volume by pressing the
Esc (
>
)
and
View (
<
) buttons.
4. Press and release the Audio button to exit.

Extron electronics CrossPoint 450 Plus Series Specifications

General

Brand	Extron electronics
Model	CrossPoint 450 Plus Series
Category	Matrix Switcher
Language	English