Extron electronics CrossPoint 450 Plus Series - Saving or Recalling a Preset

10 CrossPoint / MAV Matrix Switchers • Operation
Saving or Recalling a Preset
1. Save a preset — Press and hold the Preset button until it
flashes.
Recall a preset — Press and release the
Preset button.
PRESET PRESET
PRESET PRESET
Preset button blinks
.
Press and hold.
2 seconds
Save a
preset
Recall a
preset
Preset button lights
.
Press and release.
1 2 3 4 5 6
17 18 19 20 21 22
• All input and output buttons with
assigned presets light red.
• The configuration data at assigned
preset locations will be overwritten.
2. Press and release the desired input or output button.
1
ENTER
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
red
to indicate the need to
activate the save or recall.
3. Press and release the Enter button.