Extron electronics DTP CrossPoint 4K Series - (And Muting Outputs); Recalling a Preset; Viewing Ties

18 DTP CrossPoint 4K Series • Front Panel Operations
4. Press and release the desired output buttons.
3 4
ENTER
8
Amber indicates video and audio tie.
Green
indicates video only tie.
Red
indicates audio only tie.
Green
indicates the need
to confirm the change.
5. Press and release the Enter button. All button indicators turn
off.
Recalling a Preset
A "preset" is a conguration of ties and DSP audio settings
that has been stored using the DSP Congurator or Product
Conguration Software. Presets 1 through 18 (10x8 and 8x6 matrix
sizes) or 12 (8x4 and 8x2 matrix sizes) are selectable from the front
panel, using the input and output buttons.
1. Press and release the Preset button.
PRESET PRESET
1 2 3 4 5 6
7
The Preset button lights.Press and release.
All input and output buttons with assigned presets light red
.
2. Press and release the input or output button for the desired
preset.
1
ENTER
The button blinks red to indicate
that this preset is selected to recall.
The Enter button blinks red
to indicate
the need to activate the recall.
3. Press and release the Enter button.
Viewing Ties
1. Press the View button. Output buttons light for outputs that
have no ties established.
2. Press an input button. The buttons for all tied outputs light.
3. Press an output button. The buttons for the tied input and all
tied outputs light.
4. Press the View button again to exit View mode. All inputs and
output buttons return to an unlit state.