DTP CrossPoint 4K Series • Introduction 1
Introduction
This section gives an overview of the Extron
DTP CrossPoint 4K Series matrix switchers and describes their
features. Topics that are covered include:
• About this Guide
• About the DTP CrossPoint 4K Series
About this Guide
NOTE: For more information on subjects in this guide, see
the DTP CrossPoint 4K Series User Guide and the IPCP Pro
Series User Guide, at www.extron.com.
This guide provides instructions for an experienced installer to
set up and operate the Extron DTP CrossPoint 4K Series matrix
switchers. Step by step instructions show you how to:
• Connect the hardware (see Rear Panel on page 4)
• Perform basic operations from the front panel (see Front Panel
Operations on page 17)
• Use selected SIS commands (see SIS Command and
Response Table for Matrix Switcher Commands on page 24)
• Load and start the control programs (see Starting the Product
Configuration Software on page 30 and Starting the DSP
Configurator Program on page 31)
• Connect to the built-in HTML pages (see Accessing the HTML
pages, on page 33)
To Next Page
Loading...
