Extron electronics DTP CrossPoint 4K Series - Accessing the HTML Pages

33DTP CrossPoint 4K Series • Remote Control
Accessing the HTML Pages
NOTES:
• If your Ethernet connection to the matrix switcher is
unstable, try turning off the proxy server in your Web
browser. In Microsoft
®
Internet Explorer
®
, click Tools >
Internet Options > Connections > LAN Settings, uncheck
the Use a proxy server... box, and then click OK.
• For details on operating the switcher via HTML
pages, see the "HTML Operation" section in the
DTP CrossPoint 4K Series User Guide.
1. Start the Web browser program.
NOTE: For best results, Extron recommends the following
browsers and compatibility mode:
• Microsoft Internet Explorer, version 8.0 or newer, with
compatibility mode off
• Mozilla
®
Firefox
®
, version 6 or newer
• Google Chrome
™
, version 9 or newer
• Apple
®
Safari
®
, version 4 or newer
2. Click in the Address eld and enter the IP address.
3. Press the keyboard <Enter> key. The switcher checks whether
it is password-protected.
If the switcher is not password-protected, the switcher
displays the HTML start-up page. The switcher is ready for
operation via HTML remote control.
If the switcher is password-protected, the switcher displays
the Authentication Required dialog box (see gure 26).
Figure 26. Authentication Required Dialog Box