Need help?Do you have a question about the Extron electronics TouchLink TLP Pro 1020 Series and is the answer not in the manual?
General| Display Size | 10.1 inches |
|---|---|
| Resolution | 1280 x 800 |
| Ethernet | 10/100 Mbps |
| Mounting Options | Wall, VESA |
| Operating System | Embedded |
| Connectivity | Ethernet, USB |
| Power | 12V DC |
| Touch Technology | Projected capacitive touch (multi-touch) |
Explains the use of WARNING, CAUTION, and NOTE symbols in the guide.
Describes the conventions used for displaying commands, responses, and selectable items.
Provides an overview of the TLP Pro 720 and 1020 series touchpanel models.
Details the key features of the touchpanel series, including screen, memory, and connectivity.
Refers to an application diagram showing system configuration.
Details the components and indicators on the front panel of the touchpanels.
Describes features revealed when the front bezel is removed, like buttons and LEDs.
Identifies the connectors and mounting points on the rear panel of the touchpanels.
Guides users through the initial setup and configuration options via on-screen menus.
Explains how to calibrate the touchpanel screen for accurate touch input.
Details the process of designing and assigning functions using GUI Designer and Global Configurator.
Explains how to access and use the touchpanel's default web pages for information and firmware upgrades.
Provides instructions for downloading and updating the touchpanel firmware via web page or software.
Covers rack, wall, and furniture mounting options for the TLP Pro 720M/1020M.
Details UL guidelines and specific kits for mounting the touchpanels in a 19-inch equipment rack.
Explains how to mount the TLP Pro 720M/1020M directly into drywall or using a wall box.
Provides steps for mounting the touchpanels into a lectern or other furniture.
Outlines desktop and VESA mounting options for the TLP Pro 720T/1020T.
Describes how to place and secure the TLP Pro 720T/1020T on a desktop.
Details the process for VESA mounting the TLP Pro 720T and TLP Pro 1020T.
Explains the three reset modes: Factory Firmware, Reset IP, and Factory Defaults.
Lists third-party software packages used in the touchpanels and their licenses.
To Next Page