Ezgo 2Five - Turn Signal Bulb Replacement; Taillight;Brake Light Bulb Replacement

Owner’s Guide
82
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
MAINTENANCE
Turn Signal Bulb Replacement
Make sure that the vehicle key switch is in the
OFF position and the key has been removed.
• Remove the two Phillips head screws (1) that
secure the lens (2) to the fascia (3).
• Remove the light bulb.
• Install the new light bulb.
• Install the lens (2) and secure in place with the
two Phillips head screws (1).
Taillight/Brake Light Bulb Replacement
Make sure that the vehicle key switch is in the OFF
position and the key has been removed.
• Remove the two phillips head screws (4) that
secure the lens (5) to the taillight assembly.
• Remove the light bulb
• Install the new light bulb
• Install the lens (5) and secure in place with the
two phillips head screws (4).
2
3
1
4
5