120
abort, custom or exec. Restart fsav to take new values in use.
Unknown syslog facility '<user given value>' in
configuration file <file path> line <line
number>
Explanation: The syslogfacility ield in the configuration
file has an incorrect value.
Resolution: Edit configuration file and set the syslog- facility
field to one of the facility names found in syslog(3) manual
page. Restart fsav to take new values in use.
FATAL ERRORS
fsav fatal errors are written to the standard error stream
(stderr). In case of fatal error program execution stops imme-
diately with exit code 1.
Fatal erros reported by fsav and the descriptions are listed
below:
Error: no files to scan.
Explanation: The user has not given files to scan..
Resolution: fsav exits with fatal error status (exit code 1). The
user has to correct the command-line parameters and start
the fsav again.
Invalid socket path '<socket path>': not a socket.
Explanation: The user has given socket path which already
exists but is not a socket from configuration file or from com-
mand-line.
To Next Page
Loading...
Need help?
General
