58
8. The next step is to create a Firewall Rule that allows use of the
service you just defined. Select Firewall Rules in the Advanced mode
menu.
9. Select the profile where you want to add a new rule and click Add
new rule to create a new rule.
10. Select Accept or Deny as a rule Type. Enter a descriptive comment in
the Description field to distinguish this rule.
11. Define Remote Host to which the rule applies. Enter the IP address
of the host in the field.
12. Select the new service you have created in the Service field and the
direction when the rule is applied.
13. Click Add Service to This Rule. If you do not want to add other
services to the same rule, click Add to Firewall Rules to add the rule
to the active set of rules on the Firewall Rules table.
14. Click Save to save the new rule list.
To Next Page
Loading...
Need help?
General
