3
ENGLISH
The lid hinges can be moved upward to allow opening the box
housing (Fig. 3): they can also be removed and re-positioned
in order to enable the lid to open to the right or left.
When you have secured the box in the selected position, cover
the securing holes (Fig. 2 ref. a) and the screws with the supplied
plugs as shown in Fig. 4.
Connect the power cable to the switching feeder as shown in
Fig.5, making sure that there is an adequate thermal breaker
upstream.
Then plug the connector of the transformer to connector J1 on
the board as indicated in fig.6.
Earth
Line
Neutral
Fig. 3
Fig. 4
Fig. 5
Fig. 6
To Next Page
Loading...
