FAAC E124 - Safety Recommendations; Installer Safety; Transport and Storage; Product Disposal

5
Anta 1 Anta 2 Anta 1Anta 2
DL1
DL2
DL3
DL1
DL2
DL3
ENGLISH
Leaf 1 (DL1, DL2 on) Leaf 2 (DL1 on)
Absolute encoder
DL1
DL2
DL3
DL1
DL2
DL3
Relative encoder S700H/S800H
DL1
DL2DL3
DL1
DL2DL3
Absolute encoder S800H ENC
DL1
DL2
DL3
DL1
DL2
DL3
 /HDIRSHQVDV¿UVWDQGFORVHVDVVHFRQG
BUS 2-EASY ENCODER CONNECTION
1. Connect the 2 encoder cables to the BUS-2EASY input (red terminal) on the board.
2. Check that the encoder is connected correctly according to the table. The LEDs must be checked with the leaf stopped
If necessary, swap the 2 connecting wires to obtain the correct coupling of the encoder with the leaf as indicated in the fol-
ORZLQJ¿JXUH